CALL TODAY! 1-800-342-3623

  • RP150536 Power Switch

    $10.49
    Consists of one on/off power switch  for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40110 Foot Channel

    $48.10
    Assembly includes a bar and a screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40115 Rubber Foot

    $11.55
    Assembly includes a rubber foot, a screw and a nut for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40230 Feed Wheel Shaft

    $15.61
    Consists of one shaft for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.    

  • RP40231 3/8 Spyraflo Bearing

    $22.19
    Consists of one bearing for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.    

  • RP40235 FEEDWHEEL, CAST ON SHAFT

    $27.08
    RP40235 assembly includes a wheel w/shaft and two screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC LLC Model Numbers TDH, TDH110 & TDE110.  

  • RP40236 Cutter Guard Clip

    $11.55
    Assembly includes a clip and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40305 Left Side Cover

    $36.45
    Assembly includes a side cover and three screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40310 Top Cover Assembly

    $45.56
    Assembly includes top cover with logo, two hinges, two nuts, and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40311 Top Cover Hinge w/ Screw

    $13.01
    Assembly includes two hinges, two nuts, and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40315 Front Cover and Ramp

    $15.61
    Assembly includes a cover and four screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40320 Tape Basket/Motor Cover

    $19.33
    Assembly includes a steel plate and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40325 Marsh Cutter Guard w/screws

    $11.55
    Assembly includes a guard and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40352 Water Tank Holder

    $26.72
    RP40352  includes a water tank holder and seven screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC LLC. Model Numbers TDH, TDH110 & TDE110.

  • RP40401 Water Bottle w/Valve

    $26.42
    Water bottle and a duckbill valve for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40403 Front Water Bottle Bracket With Screw

    $11.55
    Assembly includes a bracket and a screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40404 Rear Water Bottle Bracket with Screw

    $11.55
    Assembly includes a bracket and a screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40405 Brush Tank, TD2100

    $12.62
    RP40405 water tank for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC LLC Model Numbers TDH, TDH110 & TDE110.  

  • RP40407 Moistening Brush, TD2100

    $29.03
    RP40407 replacement brush for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC LLC Model Numbers TDH, TDH110 & TDE110.  

  • RP40505 Pressure Plate

    $15.37
    Pressure plate for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40515 Tape Channel Plate

    $13.34
    Assembly includes a plate and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.       Click here for manual PDF schematic and parts list. Items #53 and #3. Click here for electric PDF schematic and parts list. Items #55 and #3.

  • RP40516 Brush Tank Cover w/Rod & Bushings

    $51.55
    Assembly includes a weighted tank cover, two screws, two brass bushings and a rod for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC, LLC. Model Numbers TDH, TDH110 & TDE110.

  • RP40517 Tape Weight With Screw

    $19.01
    Assembly includes a weight, a screw and a pin for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40522 Top and Free Roller Assembly

    $11.55
    Assembly includes roller tube, two bearings, shaft and two E-clips for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40540 Pinch Roll Assembly

    $90.97
    RP40540 sssembly includes pin, two springs, shaft, holder, roll and six E-clip lock rings for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC LLC Model Numbers TDH, TDH110 & TDE110.

  • RP40550 Tape Guide Assembly

    $80.93
    Assembly includes left and right side threaded tape guides and turnbuckle for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40560 Dead Roller

    $24.02
    Assembly includes a roll and a screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40701 Cutter Replacement Kit

    $144.62

    **Obsolete**

    See RP40703: • Used to repair all blades on TDH machines • Used on TDE110 units S/N: 618027 and NEWER if shoulder bolt and cutter return springs are not needed See RP40704: • For TDE110 units S/N: 618026 and OLDER • Kit includes all necessary components to convert the machine from 3/16" to 1/4" shoulder bolt See RP40705: • For TDE110 units S/N: 618027 and NEWER • Contents of this kit include all parts necessary to change all blades, springs, and connecting hardware in a machine that is currently equipped with a 1/4" shoulder bolt   RP40701 assembly includes a cutter blade holder, cutter blade-movable, fixed blade, fixed blade shoe, springs, set screw, four screws, two bushings and two cutter guides. For use in MSSC Model Numbers TDH, TDH110 & TDE110.  

  • RP40703 Manual Cutter Replacement Kit

    $143.00
    Contents of this kit are the same as RP40701 but with one blade holder drilled for 1/4". Used to repair TDH machines, or new TDE110 (S/N: 618027 and up) machines if the shoulder bolt and cutter return springs are not needed.

  • RP40710 Cutter Blade Moveable

    $45.08
    Upper blade only. RP40710 assembly includes cutter blade-movable, two screws and a set screw for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40715 Cutter Blade Fixed

    $41.17
    Lower blade. RP40715 assembly includes a fixed blade, four springs, a fixed blade shoe and two screws for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40730 Brass BSHG-Tape Wt Sft (Pkg OF 2)

    $11.55
    Brass BSHG-Tape Wt Sft (Pkg of 2) for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40740 Cutter Springs-Fixed Blade

    $19.53
    Contains four springs for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40825 Fixed Blade Stop-TD2100

    $13.94
    Consists of one fixed blade stop for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP40938 SCR, 6-32 X 3/16 Hex Head (Pkg of 10) For Blade

    $26.17
    SCR, 6-32 x 3/16 Hex Head (Pkg of 10) For Blade for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH, TDH110 & TDE110.

  • RP41101 Gearbox/Motor Mount Frame with Pins

    $60.67
    Assembly includes a gearbox/motor frame and two pins for the Marsh TD2100 Series Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41220 Handle Shaft Assembly

    $35.80
    Assembly includes a shaft, four screws and an E-clip for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41221 1/2 Bearing

    $11.55
    Consists of one bearing for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41225 Idler Gear Shaft

    $11.88
    Consist of one shaft for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41257 Handle Grip

    $16.93
    Assembly includes a handle arm, handle, handle insert, washer, screw and nut for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41258 Cutter Actuating Arm Assy

    $19.15
    Items #93, #104, #41, #37, #105 and #72 on left. Click here for PDF schematic and parts list.

  • RP41260 Inch Measuring Strip, TD2100

    $11.55
    Consist of one measuring strip for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41262 Metric Measuring Strip

    $11.55
    Consist of one metric measuring strip for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41290 TDH Stop Assembly

    $11.55
    Consists of a stop block and screw for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41301 Right Side Cover Assembly

    $57.68
    Assembly includes side cover, six screws, a hole plug and a stop assembly for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41301H Right Side Cover Assy w/htr

    $64.06
    Assembly includes side cover, six screws, a switch, hole plug and stop assembly for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41302 Hole Plug, Right Side Cover

    $11.55
    Consists of one hole plug for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41325 Cutter Guard Modified w/ Screws

    $11.55
    Assembly includes cutter guard modified with screws for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41502 Spring, Cutter/Solenoid Return (2)

    $14.82
    RP41502 is the cutter/solenoid return spring, pack of 2. For the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.

  • RP41904 Cutter Slide Bolt

    $22.98
    Consists of one screw for the Marsh TD2100 Manual Gummed Tape Dispenser. For use in MSSC Model Numbers TDH & TDH110.   Click here for PDF schematic and parts list. Item #92.

Toggle Sliding Bar Area